| Primary Flow Elements idFlow
|
idPitot
Mutliport Self Averaging Pitot Tubes
IdFlow introduces the latest in high performance pitot tube designs.
The idPitotTM is designed to measure flow rates of clean fluids such as steam, air, gases and liquids. It has the best cost/performance ratio on the market. This
versatile instrument is easy to install, operate and maintain.
|
|
|
idOrifice
Orifice Plates
IdFlow manufactures orifice plates to the highest quality standards.
The idOrificeTM is designed to measure low flow rates of steam, air, gases and
liquids. This technology has a broad acceptance throughout industry and is used
widely in the operation of chemical plants, steel mills, sewage treatment, paper
mills, petrochemical plants, OEM’s, etc.
|
|
|
idNozzle
Flow Nozzle
The idNozzleTM is designed to measure flow rates for fluids under extreme process
conditions, high velocity fluids, or when flow ranges are small and stable. They
are commonly used for steam, condensate, gases, air and water applications. The
absence of sharp edges to wear allow for sustained accuracy over long periods
of time.
|
|
|
idVenturi
Venturi Tube
The idVenturiTM is designed to measure flow rates for fluids under extreme process
conditions with high temperature and pressure, as well as highly corrosive and/
or abrasive fluids. This design works well on sticky or viscous liquids, on slurries,
sludge, as well as chemicals, water, gases, air and steam. This versatile meter
has excellent turndown, allows for bi-directional flow measurement, results in low
permanent pressure loss and has high accuracy.
|
|
|
idWedge
Wedge Tube
The idWedgeTM is designed to measure flow rates for fluids under extreme process
conditions with high temperature and pressure, as well as highly viscous, corrosive
and abrasive properties. It has the ability to measure very sticky processes such as
asphalt. It is commonly used to measure sludge, slurries, chemicals, water, gases,
air and steam. It has excellent turndown, allows for bi-directional flow measurement,
results in low permanent pressure loss and offers excellent accuracy.
|
|
idCone
Cone Tube
The idConeTM is designed to measure flow rates for liquid and gases in tight pipe
configurations where straight runs do not occur. By reshaping the flow profile, it
can measure turbulent flow of fluids such as viscous liquids, water, gases, air and
steam. It can measure very low flow ranges, has a low permanent pressure loss and
maintains excellent accuracy.
|
|
|
