|
Category: Analytical Division
Sub-category |
Description |
Specifications |
|
| Accessories
|
Gas Sample Probes (heated and unheated)
SP10
-Sampling of dusty process gases
-Fast response time
-Easy mounting and maintenance
-Various materials and lengths for extension tube and filters
-Many optional configurations are available
Application: The M&C gas sample probes, Version SP 10, are to be installed for continuous sampling of high dust loaded gases, large flow sampling, as well as for general gas sampling. Due to its compact design, it requires only limited space.
|
|
|
Dilution Probes
Dilute the gas directly at the sample point, dilution ratio 500:1 down to 10:1
SP2000-H/DIL
-Based on probe SP2000H/....
-Electrically heated up to 180°C
-External critical orifice is heated
-Including a dilution gas pre-heater
-No dew point problems
-Dilution rates from 10:1 up to 500:1
-With check gas connection
-Independent of the process temperature
-Easy operation and maintenance
Application: The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.
|
|
|
Sample Gas Coolers (Peltier)
ECP2000
-With patented Jet-Stream heat exchanger
- Ambient temperature up to +50°C
- Dew point +5°C +/-0,1°C
- With alarm contact
- Small dimensions, light weight
- Optimum reliability
Application: The ECP 2000 gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors.
|
|
|
Absorption Filters
F...-AP
- Chargeable with a variety of adsorption materials
- Easy change of filling materials
- Condition of filling material visible from outside
- Different filter materials
- Wall mounting
Application: In analysis technique M&C FP-...-D/F and F..-AP universal filters are used for the adsorption of components which cause interferences.
|
|
|
NOx Gas Converters
CG-2
- Gas inlet non heated for "cold gas" conversion. High flow capacity, long operating time, high conversion efficiency
- Catalyst cartridge easy to change
- without any tools
- Operating temperature up to 680 °C
- Built in a compact 19"-rack housing
- Safe handling and easy servicing
Application: In many countries clean-air regulations require a continuous measurement of nitrogen oxides NOx, as the sum of nitrogen dioxide NO2 and nitrogen monoxide NO, for combustion processes as soon as the part of NO2 exceeds 5 % of the total NOx emission. Due to the conversion to NO the use of a standard NO-analyser is possible.
|
|
|
|
|
