|
|
| Sub-categories |
Description |
Picture |
Specifications |
|
|
|
Various Gas Analyzers
A complete line of process (CGA) and environmental (CEMS) analyzers from photometers (Easy Line and Advanced Optima), Gas Chromatographs and Mass Spectrometers to the Advance Fourrier Transform Infrared (FTIR) wide spectrum spectrometer.
|
|
|
|
Natural BTU Gas Chromatograph
The NGC (Natural Gas Chromatograph performs on-site gas analysis and heating value computation where current chromatograph technology has been either impractical or unaffordable. This truly transmitter-like” GC takes up no more room on the pipeline than most multivariable transmitters.
|
|
|
|
SS2000 H2O & HCL Analyzer in Hydrogen Recycle/Hydrogen Reformers Process in Refineries to measure Gas Quality using Tunable Diode Lasers(TDL) technology
The Catalytic Reformer Unit of a modern refnery is an important process unit for converting lower octane naphtha streams into higher octane aromatic compounds. The SpectraSensors analyzer is the ideal solution for this challenging application. Its non-contact sensor is impervious to damage from contaminants and being laser-based, there are no wet-up or dry-down delays resulting in significant savings in time and labor.
|
|
|
|
SS2100 H2O in Olefin(Ethylene, Propylene, Isobutane) Gas Analyzer for Petrochemical Companies
Production of quality polymers, such as polyethylene, depends on olefin feed streams that are extremely pure. Contaminants such as moisture can discolor the final product and shorten the life of the reaction catalyst.
SS2100 for Olefin measurement is an ideal tool for this critical measurement due to its ability to provide analysis that is dependable, responsive and extremely sensitive.
|
|
|
|
Combustion Oxygen and COe Analyzers
In-situ oxygen probes using Zirconia Oxide cells for improved combustion control and semi-extractive units for the measurement of oxygen and COe.
|
|
|
|
Portable and Stationary Flue Gas and Combustion Analyzers
Madur Electronics produces a wide range of portable and stationary flue gas analysers for measurement of stack gases and landfill emissions.
|
|
|
|
Fixed Gas Detectors
In many industrial applications, safety is ensured around the clock by a fixed gas detection system. Hazards can have several origins: the release of toxic gases, oxygen deficiency or enrichment as well as the presence of combustible gases and vapors. When detected at an early stage, countermeasures can be initiated to protect personnel, workplaces and equipment.
|
|
|
Portable Gas Detectors
Dräger's portable gas detection instruments have been developed to meet the demands of our everyday working lives. Handy and robust, they provide a high technical standard and have been tried and tested in different fields of application.
|
|
|
|
|
|
Environmental Air Quality
|
|
CEMS- Continuous Emissions Monitoring Systems
A complete line of environmental gas analyzers from photometers (Easy Line and Advanced Optima) to the Advance FTIR. Full CEMS with ABB parts (sample probes, sample transport, sample conditioning and analysis).
|
|
|
Opacity and Particulate Monitors
Offers a full line of recognized EPA and TÜV opacity monitors and other particulate monitors.
|
|
|
|
|
|
|
pH Sensors and transmitters
ABB provide a range of process, laboratory and industrial systems and electrodes for the measurement of pH/Redox(ORP). Utilizing patented sensor technologies, they consistently out perform other manufacturers’ instruments in the most challenging process conditions, including high temperatures, high pressures and solids. Assemblies with polypropylene and stainless steel bodies, designed for 12mm DIN sensors, offer superior performance.
|
|
|
|
Conductivity Sensors and Transmitters
ABB provides an extensive range of cells, guaranteeing exceptional durability, accuracy and easy maintenance.
|
|
|
|
Liquid Analyzers: Turbidity, Disolved Oxygen, Ammonia, Chloride, Fluoride, Hydrazine, Nitrate, Phosphate, Silica and Sodium
On-line liquid analyzers for the continuous measurement of ammonia, chloride, fluoride, hydrazine, nitrate, phosphate, silica and sodium. Other measurements include turbidity and dissolved oxygen (ppb/ppm levels)
|
|
|
|
Multiwave Photometer Liquid Analyzers
The ABB Process Multiwave Photometers - PIR3502, PFO3372, and PIR3502 provide continuous on-line measurement of liquid components, in simple or complex press streams, for process control, product quality assurance, safety, catalyst protecton and area monitoring.
These photometers operate in the the infrared (IR), near infrared (NIR), ultraviolet (UV) and visible (VIS) regions.
|
|
|
|
Various Petrochemical Gasoline and Diesel FTNIR Analyzers Laboratory & Process System Packages
Diesel and Gasoline Refinary Feedstocks Blending to Produce an Octane on Spec!
The ABB lab and process FTNIR spectrometers are analyzers that gives fast and reproducible measurements and the only spectrometer to use a global model that can be transfered from one analyzer to the other. The robust and FTNIR spectrometer construction is the same for the lab and the online analyzer. It measures the hydrocarbons; octanes(RON, MON), volume % aromatics, volume % benzene, volume % olefin, etc.
|
|
|
|
NEW Analyzer! MB3000 Laboratory Spectrometer Fourrier Transform Near InfraRed(FTNIR) Analyzer
Step up to the new MB3000 FTIR spectrometer from ABB.
It is the most reliable FTIR system in the market with the lowest cost of ownership. Combined with the intuitive Horizon MBTM FTIR software, the MB3000 will facilitate acquisition, processing and analysis of samples. Easy to use and maintenance free, it will provide constant analysis results for years to come. The MB3000 offers ease of use, reliability and constant results in order to address the concerns of lab users.
|
|
|
|
Concentration In-line Liquid Process Refractometers
K-Patents designs and supplies specialised on-line liquid analysers and refractometers for industrial process control. These products are used in thousands of different applications in sugar, food, pulp and paper, chemical, petrochemical and textile industries.
|
|
|
In-line and Portable Viscosity Meters
Vibration type process viscometers: portable, in-line and automatic on-line
|
|
|
|
|
|
|
Pharmaceutical Laboratory and Process FTIR and FTNIR Spectrometers
Content uniformity of solid dosage forms is easily measured with the Tablet Sampling. This accessory comes with two universal trays for round and cylindrical-shaped forms.
Also available powder sampling, hand held diffuse reflectance fiber optic probes, bag sampling and other types of accessories.
|
|
|
|
Solids On-line or Laboratory Moisture Near-Infrared Non-Contact measurement
Process Sensors is a leading manufacturer of state-of-the-art moisture gauges and sensors, providing the most accurate and reliable moisture measurement available for quality control in manufacturing processes, for industries worldwide.
|
|
|
|
Suspended Solids Sensors and Transmitters
Providing accurate and reliable measurement of suspended solids to sites across the world in dairy, food & beverage, pharmaceutical, brewing, pulp & paper, waste water and mining applications.
|
|
|
|
|
|
|
Gas Sample Probes (heated and unheated)
SP10
-Sampling of dusty process gases
-Fast response time
-Easy mounting and maintenance
-Various materials and lengths for extension tube and filters
-Many optional configurations are available
Application: The M&C gas sample probes, Version SP 10, are to be installed for continuous sampling of high dust loaded gases, large flow sampling, as well as for general gas sampling. Due to its compact design, it requires only limited space.
|
|
|
|
Dilution Probes
Dilute the gas directly at the sample point, dilution ratio 500:1 down to 10:1
SP2000-H/DIL
-Based on probe SP2000H/....
-Electrically heated up to 180°C
-External critical orifice is heated
-Including a dilution gas pre-heater
-No dew point problems
-Dilution rates from 10:1 up to 500:1
-With check gas connection
-Independent of the process temperature
-Easy operation and maintenance
Application: The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.
|
|
|
|
Sample Gas Coolers (Peltier)
ECP2000
-With patented Jet-Stream heat exchanger
- Ambient temperature up to +50°C
- Dew point +5°C +/-0,1°C
- With alarm contact
- Small dimensions, light weight
- Optimum reliability
Application: The ECP 2000 gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors.
|
|
|
|
Absorption Filters
F...-AP
- Chargeable with a variety of adsorption materials
- Easy change of filling materials
- Condition of filling material visible from outside
- Different filter materials
- Wall mounting
Application: In analysis technique M&C FP-...-D/F and F..-AP universal filters are used for the adsorption of components which cause interferences.
|
|
|
|
NOx Gas Converters
CG-2
- Gas inlet non heated for "cold gas" conversion. High flow capacity, long operating time, high conversion efficiency
- Catalyst cartridge easy to change
- without any tools
- Operating temperature up to 680 °C
- Built in a compact 19"-rack housing
- Safe handling and easy servicing
Application: In many countries clean-air regulations require a continuous measurement of nitrogen oxides NOx, as the sum of nitrogen dioxide NO2 and nitrogen monoxide NO, for combustion processes as soon as the part of NO2 exceeds 5 % of the total NOx emission. Due to the conversion to NO the use of a standard NO-analyser is possible.
|
|
|
|
|
|
